One of the top problems we talk to customers about is making sure they get everything they need the first time for their project. It doesn’t sound as crucial for people who live mere minutes from one of our two locations, but it can be, and for people who are hours away, or even across the country, it becomes a necessity. With that in mind, let’s go over some items that are as neglected as batteries on Christmas morning.
Catalyst – Generally, MEK-P is the most neglected product. MEK-P catalyst is essential for all resin and gelcoat; it’s what makes the product hard and it is a requirement that, unless you are ordering a kit, is not included. Make sure you go by the catalyst chart to find out how much you need. MEK-P comes in 1 oz, 2 oz, 8 oz, pint, quart and gallon jugs.
Brushes or rollers – I can’t tell you how often people get home and get ready to mix their gelcoat or resin or epoxy and stop and wonder how they are going to apply it. For rollers, you want to make sure they are Phenolic roller covers or they will break up while rolling on the gelcoat and resin. With brushes, you can use our Chip brushes, or even our higher-end Glasskoter brushes.
Mixing buckets – Most problems from gelcoat or even epoxy come from either in-proper measuring or in-proper mixing. Many people (including me) go with the tried and true ‘eyeball method’ of measuring. The problem is epoxy and gelcoat are both very specific and very unforgiving on their measurements. If you aren’t exact, you can have a problem. Also remember; a $2 mixing bucket is way cheaper than throwing the product away and re-buying it because it didn’t harden properly. We sell mix and measure buckets perfect for mixing (and measuring) with measurement lines on the side in pint, quart, 2-1/2 quart and 5-quart sizes. For catalyst, we sell measuring cups, and my favorite, a squeeze bottle for quick, easy measuring.
Safety equipment – We’ve already talked a bit about safety equipment here, but it’s surprising how few people use gloves. Gloves are a vital part to a persons protection and it’s a cheap, easy purchase. A box of gloves is as inexpensive as $6.07 for a box of 100, so pick them up and they will last you a few projects.
Solvents for cleanup – Cleanup is one that almost always overlooked until the project is finished and the mess has been made. Gelcoat is not like paint, where you can use a damp rag; for gelcoat and resin, you will want to use Acetone for your cleanup needs. For epoxies, you will want to use T-12 and for paints, you will want to use mineral spirits to get the residue up. Just remember, with all solvents to be careful how and where you use them as they are harsh and can damage certain surfaces (like wood floors…don’t ask).
So, next time you need a project and you are at the showroom, or on our website, remember to get everything you need so your project can turn out amazing.