5 Key Points on Laminating Epoxy Resin

We can guess that you have used Epoxy before, if not, more than likely you have seen furniture, an object or project with epoxy on it. Now, Epoxy is not the same as Polyester and Vinylester due to its chemical properties. Another difference is, Polyester and Vinylester uses the same hardener and as a result, the appearance between the two are similar, while epoxy tends to have a slight yellow or amber appearance. 125463There are many different categories of epoxy, so today we will highlight one of them; laminating epoxy.

1) The laminating system cures to a high strength moisture resistant plastic, with good physical properties.

2) The ratio is well suited for use with high-solids marine, maintenance coating and bonding agents.

3) The cure time is three days in the sun or a week if it is not. Set time changes with activator and film thickness.

4) If there is an excessive amount of activator applied , the laminating epoxy will be soft and rubbery. In contrast, if there is not enough activator, the epoxy will not cure hard.

5) The epoxy cures faster in high temperatures in thick layer applications.

Please note: additional recoating of this material is thoroughly cured. If the product has cured hard and tack-free, a light sanding and solvent wash is advisable before recoating.

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s