4 tips on Bust-A-Bubble


Bust-A-Bubble is a pump-bottle spray used to get surface bubbles out of table top epoxy. It can be an useful  tool, especially for someone without a heat gun, but as with everything, you need to look at a few tips from the pros:

  • It is recommended for thin pours where bubbles are close to the surface
  • A very light mist is all you want to spray for your table top; any more than that effects the epoxy.
  • We recommend spraying it as soon as your surface has been covered.
  • Don’t spray it onto a surface when another layer is to be poured, as it can effect curing.