FGCI Product Spotlight: Tuff Coat

ftl-demo-boat-5Every once in awhile, we get really excited about a product or product line we bring in. To say we were giddy with our latest product line would be an understatement. With that, let’s talk about Tuff Coat!

So, you may be wondering ‘what is Tuff Coat?’ Tuff Coat is a rubberized non-skid coating you can apply to many different surfaces from concrete to fiberglass, even aluminum. Instead of the other non-skids that wear off quickly, or are really hard on your feet, this product is extremely durable, and the rubber makes walking on it very easy.

Now that you are thinking that it sounds like fun, it’s time to talk about the application. Applying Tuff Coat is actually very easy!

 

Step 1: Surface prep. You will want to scrub your surface with soap and water to remove and dirt and grease. The folks at Tuff Coat say the product is only as good as the surface it adheres to, so make sure it’s cleaned. If you are applying to concrete, use a concrete cleaner like ZEP or Simple Green. Make sure you don’t use a solvent, as that can leave a residue.

Step 2: Primer Application. Tuff Coat offers two kinds of primers. The first is the CP-10, which is a 1:1 epoxy primer. This is mixed in equal volumes with a drill mixer and mixed for 2-3 minutes. It is recommended you roll it on with a 3/8″ nap roller or paint brush. You have a pot time of 90 minutes, so make sure you only make what you can spread. This product will be ready to go in 6 to 48 hours, depending on how hot it is and how humid it is.

The other primer is the MP-10 Water based Metal Primer. This is good for any metal application and is a single-stage mix. Again, you will want to stir with a drill mixer and apply the same way. This product is ready to go in 1-4 hours depending on the temperature and humidity.

Step 3: Apply your Tuff Coat. Once you choose which color you want (they have quite a few) it’s time to apply the Tuff Coat. You need to mix with a drill mixer in a bucket, slowly moving down from the top. You may need to mix several times to keep the rubber suspended in the material. When it’s time to apply the product, apply with a Tuff Coat specific roller (it’s the only way to properly distribute the rubber coating) and apply with 2-3 coats, applying at right angles with each coat to ensure a proper covering. The product can also be sprayed with certain sprayers for larger applications.

It’s that easy! Below we have some pictures of a demo boat we did, and I also included a great how-to video that shows how it’s done. And with all of our products, if you have any questions, please don’t hesitate to e-mail us, Facebook us, send us a Tweet, or give us a call at 1-800-272-7890 and we will be happy to answer your questions.

 

tuff-coat-4